• »Carbon Additives
  • •Calcined Petroleum Coke (CPC)
  • •Coconut Shell (Shell Charcoal)
  • •Coal Powder
  • •Graphite Flakes
  • •Graphite Powder
  • •Met Coke
  • •Pitch Coal
• »Coal & Coke
  • •Carbon Coke
  • •Low Ash Metallurgical Coke
  • •Nut Coke,Pearl Coke & Breeze Coke
  • •Steam Coal
• »Ferro Alloys
  • •Calcium Cillicide
  • •Ferro Chrome
  • •Ferro Manganese
  • •Ferro Silicon
  • •Ferro Sillicon Magnesium
  • •Ferro Titanium
  • •Silico Manganese
• »Fluxes
  • •Core Fixer
  • •Desulpheriser
  • •Exothermic Sleeves
  • •Green Flux
  • •Iron Cement
  • •Molasses
  • •Pearlite
  • •Scrap Melt
  • •Slag Coagulant
  • •Sodium Silicate
• »Minerals
  • •Acidic Ramming Mass
  • •Aluminium Shots
  • •Basic Ramming Mass
  • •China Clay
  • •Dolomite Powder
  • •Ordinary Cuploa Ramming Mass
  • •Premixed Or Daka Ramming Mass
  • •Silica Sand
  • •Limestone
  • •Breakdown Powder
  • •Exothermic Powder
  • •Red Iron Oxide Powder
  • •A.P.C. Powder
  • •Ferrogen Powder
  • •Magnasite Powder
  • •Yellow Dextrin Powder
  • •Bentonite Powder
  • •Boric Acid Powder
  • •Soapstone Powder
• »Refractories
  • •Accoset- 50
  • •Asbestos Sheet
  • •Insulation Blanket
  • •Fire Bricks
  • •Fire Clay
  • •Firecrete Super
  • •Insulation Bricks
  • •Fire Slabs, Kafa Block & Burner Block
• »Foundry Resins
  • •Core Oil
  • •No bake Two Part Phenolic Resin System
  • •Silbond (Sodium Silicate Hardener Paste)
  • •Single Component Self-Setting Core Binder
  • •Three Part Resin System
• »Inoculants
• »Foundry Accesories
  • •Iron Chaplets
  • •Lifting Magnet
  • •Cut Wire Shots
  • •Steel Shots
• »Ceramic Foundry Filters

The Product is a perfect blend of efficiency and effectiveness. Our ceramic filters have following properties:

• Prepared Under High Pressure
• Dense
• Uniform Pores With Accurate Distribution
• Dimensionally Accurate

Our Ceramic Filters can deliver to temperature as high as 1450°C. Manufactured from premium quality ceramic and refractory materials, these ceramic foundry filters have good resistance to abrasion and erosion.

The demands placed on today's foundryman for ever-increasing casting quality and tighter physical and chemical specifications have led to the adoption of foundry filters as standard practice. As a result, an increasing number of end-users insist that their castings are filtered as part of their specification.

Our Ceramic Filter are perforated ones for use in Grey, Ductile & SG Iron casting applications. These ceramic filters efficiently remove slag dross & other non-metallic inclusions from molten iron. The advantages of our product includes:

• Relative System Choke Parameters Remains Certain In Calculation
• Uniform Porosity
• No Variation In Holes
• Consistent Flow Rate
• Good Dimensional Stability
• Rate Of Occuring Dead Spots Is Very Less
• Deep Bed Filteration Retains Micro Sand Particles
• Highly Consistent Dimensional Capability & Stability
• Ceramic Filters Cost 40% Less As Compared To Foam Filters